Kip per square inch conversions

Convert kips per square inch to

kip per square inch (unit of pressure), pl. kips per square inch, abbr. ksi

The kip per square inch conversion selector selects the pressure/stress measurement unit to convert to starting from kips per square inch (ksi). To make a conversion starting from a unit of pressure other than kip per square inch, simply click on the "Reset" button.

About kip per square inch

The kip per square inch is a unit of pressure equal to 6.894757 × 106 pascals (1 ksi = 6.894757 × 106 Pa), the SI derived unit of pressure.

The kip per square inch (ksi) is also equal to 6.894757 × 104 hectopascals (hPa), or 6.894757 × 103 kilopascals (kPa), or about 68.0459 atmospheres (atm), or 68.9475 bars (bar), or 51,714.9 millimeters of mercury at 0 °C (mmHg), or 27,679.9 inches of water at 4 °C (inH2O), or 1,000 pounds per square inch (psi), or 144,000 pounds per square foot (psf) or 51,714.9 torr (Torr).

The kip per square inch is the pressure that results when a force of 1,000 pound-force is applied (uniformly and perpendicularly) on a surface of one square inch. The pound-force (lbf) is a unit of force while the square inch (sq in) is a unit of area.

The kip per square inch (ksi) unit is occasionally used in materials science and engineering.

Symbol: ksi

Plural: kips per square inch

Also known as: kilopound-force per square inch (plural: kilopounds-force per square inch), kilopound per square inch (plural: kilopounds per square inch)

Back to kip per square inch (ksi)

DefinitionSelectorTop